What does CFR stand for? Continuous Flow Recycling, a patented system of commercial cleaning equipment specifically designed for high-performance fabric hygiene to include carpets, upholstery, drapes and panels.
Where is CFR from? CFR engineers, designs, manufactures and markets all of their carpet cleaning machines in Fort Worth, Texas. They are an American owned and operated and take extreme pride in their quality craftsmanship. They market their products worldwide.
How does CFR compete in the carpet care industry with so many competitors, what gives them the edge? In addition to superior quality and craftsmanship the four reasons people buy CFR are:
How can you clean with recycled water? It is important to understand that soil removal is the only measurement of cleaning effectiveness. If you cleaned an area and only removed 65% of the soil present, you wouldn’t define the results as quality cleaning, would you? CFR environmental cleaning is substantially more effective at removing soil than any other cleaning system we know of. Due to the unique solution control system we get up to 95% recovery, which means cleaner carpets and faster dry times. Recycling is a consideration only after soil removal efficiency. Then the consideration is "how effectively are the soils filtered from the fluids prior to recycling." CFR’s unique system filters up to 95% of the removed soils prior to recycling and reuse of the cleaning fluids.
How often does the water need to be changed? This varies depending on the soil load of the carpet. The CFR systems make it a simple process. Each system is equipped with an automatic pump shut-off that turns the system off when the water needs to be changed. However, here are some general guidelines: Typical carpet soils every 325 - 372 m² (3,500 – 4,000 sq. ft). or when the system requires the fifth water addition. Heavy carpet soils every 139 - 186 m² (1,500 – 2,000 sq. ft.) or when the system requires the third water addition.
How much can you clean per hour? As with all commercial equipment production varies with:
Field experience indicates these general productivity rates with the CFR system:
How does CFR perform on spots? If soils are properly treated before removal with the CFR spotting kit, the majority of spots are easily removed. However, in the case of urine, the urine deposit should be treated with "enz-out" to decompose it prior to cleaning. Coffee, soda and similar spots provide a classic illustration of CFR’s cleaning effectiveness compared to competitive equipment. Competitive equipment often pushes the spot deeper only to have it reappear following cleaning. CFR thoroughly washes the spot out, removing it completely. The amount of solids present in these stains (ie. sugar, dye, coffee, etc.) is very small, usually no more than 2%. When removed by CFR cleaning, any elements not retained by the filtration system are diluted at a minimum of 5,000 to 1 in the CFR fluid reservoir. Thus, these spots are not a consideration for redeposition, contamination or appearance. View the range of CFR machines here