PROBLEM: CARPET STIFFNESS AFTER CLEANING

CAUSES: Stiffness in carpet after cleaning can occur for several reasons...

1. Over use of chemicals.
2. Improper chemical use.
3. Hard water.
4. Emulsification of soluble residues that are not completely extracted.
5. However, the most common cause is residue not completely removed during the cleaning process.

SOLUTION:

1. Usually a slight stiffness problem will correct itself after it has been vacuumed once or twice.
2. In mild cases pile lifting with Cleancare’s “Grandi Groom” or a pile lifting machine may be necessary.
3. If the problem is severe, re-cleaning the area using the normal amount of detergent for good soil suspension and to reduce soil re-deposition will usually correct the problem.
4. Following the cleaning of carpets affected by stiffness, sour the carpet lightly with Cleancare’s “Textile Rinse” to neutralise any detergent residues.
5. Always set the pile with a groomer or nap brush such as Cleancare’s “Grandi Groom” after cleaning and use Turbo Dryers to speed dry the carpet.
6. Dry vacuuming may be necessary following wet cleaning procedures.

PLEASE NOTE: These procedures and recommendations have been compiled in order to assist the professional cleaner. CLEANCARE AUSTRALIA do not warrant these procedures expressed or implied, nor assume any liability or responsibility whatsoever in connection with their use.